BMMQP - X-2 TRU-TEST SUPREME EXTERIOR GLOSS HOUSE & TRIM PAINT
- MSDS: BMMQP
- Manufacturer: TRU TEST MANUFACTURING COMPANY
- Product Name: X-2 TRU-TEST SUPREME EXTERIOR GLOSS HOUSE & TRIM PAINT
- National Stock Number: 8010-00F021806
Product Identification
Product ID:X-2 TRU-TEST SUPREME EXTERIOR GLOSS HOUSE & TRIM PAINT
MSDS Date:07/24/1990
FSC:8010
NIIN:00F021806
MSDS Number: BMMQP
Responsible Party
CARY, IL 60013
Emergency Phone: (800) 228-5635
Info Phone: (708) 639-5383
Cage: TRUTE
Contractor
Telephone: 708-639-5383
Cage: TRUTE
Ingredients
TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 13-18%
OSHA PEL 20 MPPCF
ACGIH TLV: 2 MG/CUM (RESP DUST)
KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 20-25%
OSHA PEL 500 PPM
ACGIH TLV: 10 PPM
<300 GM/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HEADAHCE, DIZZINESS, &
NAUSEA. EYES: IRRITATION. SKIN: DRYNESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE, DIZZINESS, & NAUSEA.
EYES: IRRITATION. SKIN: DRYNESS.
First Aid
First Aid:EYES: WASH W/WATER. SKIN: WASH W/WARM WATER & SOAP.
INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION.
INGESTION: DON'T INDUCE VOMITING. KEEP WARM & QUIET. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:105F
Lower Limits:0.9%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. IF WATER SPRAY
IS USED, FOG NOZZLES ARE PERFERABLE. TREAT AS A VOLATILE LIQUID
FIRE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. COMBUSTIBLE LIQUID.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. CONTAIN SPILL,
ABSORB LIQUID W/CALY, SAND, OR FLOOR ABSORBENT. PREVENT RUN-OFF TO
SEWERS, STREAMS, OR OTHER BODIES OF WATER.
Handling
Handling and Storage Precautions:CONTAINERS SHOULD BE GROUNDED WHEN
POURING. KEEP AWAY FROM HEAT, SPARKS, & OPEN FLAMES. AVOID FREE
FALL OF MORE THAN 2-3 INCHES WHEN POURING.
Other Precautions:DON'T TAKE INTERNALLY. AVOID CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED AIR-SUPPLIED RESPIRATOR
WHEN >TLV. USE APPROVED MECHANICAL FILTER TO REMOVE SOLID AIRBORNE
PARTICLES OF OVERSPRAY DURING APPLICATION.
Ventilation:SUFFICIENT MECHANICAL (GENERAL/LOCAL) TO KEEP
Eye Protection:SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING, SMOKING, OR USING BATHROOM.
Supplemental Safety and Health
BOILING RANGE: 300-380F.
Chemical Properties
Boiling Pt:B.P. Text:SEE SUPP.
Vapor Density:
Appearance and Odor:VARIES W/COLOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME
Disposal
Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DEPOSITED IN A
LANDFILL IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS.
COMBUSTIBLE LIQUID.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.